Digital Door Viewer Integrated Doorbell with Night Vision, Electronic Peephole with 2.8 inch LCD Screen

Integrated Doorbell

After pressing the doorbell key, the screen will automatically light up.

Night Vision

Night Vision Supported by Two Infrared Lights.

Internet or Wi-Fi is not required

This product is able to operate without Internet or Wi-Fi.

Economical Cost of Use

The standby duration is up to 180 days, which can save money of replacing the batteries.

**Batteries not included in the set.

Screen and Camera

2.8 inch Color LCD Screen with 320*240 Resolution

90° Wide-Angle Camera Sensor

Easy to Install and Broad Applicability

Applicable Door Hole Diameter: 14-22mm

Applicable Door Thickness: 35-120mm

Internal Memory

Up to 92 photos can be stored in the internal memory.

Kindly note: The photos will be stored cyclically. When the internal memory is full, the new photo will cover the oldest one.

One-Click to Photograph

Press the Power Key to take a photo.

How to install this product?

Step 1, Screw the screw suitable for the thickness of your door into the column on the camera unit.

Step 2, Remove the protective film of the double-sided adhesive tape on the back of the camera. Then paste the camera unit to the door and make the column through the door hole.

Step 3, Lead the FPC cable through the hole in the center of the metal bracket. Then tighten the screws through the hole next to the FPC cable hole to fix the metal bracket on the other side of the door.

Step 4, Put 4 pcs AAA batteries into the battery compartment of the monitor.

Step 5, Connect the FPC cable to the socket on the back of the monitor. And hang the monitor on the metal bracket.

Got everything?

1 X Outdoor Unit

1 X Indoor Unit

1 X Metal Bracket

3 X Screws

1 X User Manual